All solder joints in the proportional size production process of cyclone dust remover must be firmly

Before installing the proportional dimensions of the cyclone dust collector, check the quality of the dust collecting bag and the dust collecting frame. The package does not need to be offline, jumper wire, wireless head, and the package size should match the diameter of the mirror frame. Also check that the bag's material matches the material you ordered. If there is any discrepancy, please contact the supplier for exchange as soon as possible. High quality cyclone dust remover proportional size requirements smooth appearance, no burr, no leakage welding. The easy way to do this is to open the welding section, the white gauze gloves of the handbag, and no wires.

A good dust removal skeleton should have sufficient strength, stiffness, verticality and dimensional accuracy to prevent deformation under pressure, damage during transportation, contact with the filter bag after loading into the pulse filter, difficulty in bagging, bag rack friction, etc. This has already happened.

In the proportional size production process of cyclone dust remover, all solder joints must be firm, no disassembly, no solder or no solder; The surface should be smooth, straight, burr free and evenly welded. The surface treatment can be sprayed with spray or treated with silicone. Galvanized or stainless steel has corrosion - resistant temperature and humidity requirements.

In order to meet the demand for increased production, the volume of proportionally sized fans for the cyclone dust collector has also been increased. The electric field working voltage of the electrostatic precipitator is stable at 50-55kV, the cleaning pressure of the cyclone precipitator is 0.24MP, the pulse width is 0.1-0.2, the pulse interval is 5-30, and the cleaning cycle is tentatively set at 14 minutes. Determine that the emission concentration (standard state) of the chimney is lower than 30 g / 3 to achieve the desired effect. Filter bag is the core component of cyclone dust collector. The complete filter bag consists of the bag body, bracket, clamp, chain and other accessories. The proportional size of cyclone dust collector is external filter and internal filter. The main components of the external filter are venturi pipe, frame, elastic pocket ring and so on. The main parts of the proportional size of cyclone dust collector are anti-mite ring, bag rope, bag cover, clamp and so on.