A detailed description
use
Type W5-47 high temperature fan room high efficiency low noise fan, mainly used to transport medium temperature temperature below 600℃, harmless to human body, no corrosive to steel materials, high temperature gas, dust and hard particles in the gas is not more than 150mg/m?
In the form of
1. The fan is a single suction machine with No.5-12.4D
2. The fan can be made into two forms of left and right rotation, facing directly from one end of the motor. For example, if the impeller rotates clockwise, the fan is said to turn right, which is represented as "right"; Turn counterclockwise and call left cyclone as "left".
3. The outlet position of the fan is generally made into 90°, which can also be designed and manufactured according to user requirements.
4. The fan is driven by Type C and Type D, which respectively represent belt wheel drive and coupling drive.
Structural characteristics of
The fan is mainly composed of impeller, casing, transmission set, adjusting door and other parts.
1. The impeller is made of high temperature resistant material by welding, and after static and dynamic balance correction, the air performance is good, the efficiency is high, the operation is stable and reliable.
2. The casing is made of high temperature resistant material into volute type whole.
3. The air inlet is made of high temperature resistant material, and is installed on the side of the fan. The section parallel to the axial direction is a curved shape, which enables the gas to enter the impeller smoothly and with less loss.
4. The driving part is composed of spindle (made of high temperature resistant material), bearing box, rolling bearing, belt wheel or coupling. The rolling bearing is cooled by two sets of water cooling devices, and the cooling is reliable.
performance
简体中文
