W9-26 series high temperature fans

A detailed description

use

The series fans are suitable for conveying high temperature gas with no corrosion, no spontaneous combustion and the highest temperature not exceeding 700℃. The dust and hard particles contained in the medium shall not be greater than 150mg/㎡

In the form of

1. This series of fans are single suction type.

2. This series of fans can be made into two forms, right-handed and left-handed. From one end of the motor, the impeller will rotate clockwise, which is called the right rotating fan, and is represented by "right"; Turn counterclockwise and call the left rotating fan as "left".

3. The outlet position of the fan is represented by the outlet Angle of the housing. "left" and "right" can be made into 6 angles, namely 0°, 45°, 90°, 135°, 180° and 225°.

Structural characteristics of

1. The impeller has 12 forward-bending blades. After forming, the impeller is tested for dynamic, static balance and overspeed, ensuring smooth, safe and reliable operation.

2. The casing is made of low alloy steel plate

3. The air inlet and the accumulative streamlined overall structure are bolted to the front cover plate group.

4. The transmission unit is composed of spindle, water-cooled bearing box, coupling, etc. The spindle is made of high-quality alloy steel and the bearing box is an integral water-cooled structure.

performance