use
H10-13-11 high pressure centrifugal fan is designed according to the performance required by new type cupola "waist cupola". The fan is suitable for furnace blowers with calcinate ratio of 5t/h, also suitable for other furnace cupola blowers and other high-pressure forced ventilators material transportation. The working conditions are: the working medium is air and non-corrosive, non-spontaneous combustion and non-viscous gas. The temperature of the medium shall not exceed 80℃, and the dust and hard particles contained in the gas shall not be greater than 150mg/m. .
In the form of
(1) It is a single suction type, and the machine Numbers are divided into No.6, 6.3, 6.9 and 7.5 according to the requirements of cupola. All motors are directly connected with impeller.
(2) It is made into two forms of right-handed or left-handed rotation according to the requirements of use. The impeller rotates clockwise from the motor end to the right-handed fan, which is represented as "shun", and vice versa for the left cyclone, which is represented as "inverse".
(3) The air outlet position of the fan is expressed as the exit Angle of the casing. The "inverse" and "cis" cyclone can be made into four angles of 0°, 90°, 180° and 270° according to the requirements of use.
Structural characteristics of
The fan is mainly composed of impeller, casing, air inlet and bracket.
(1) The impeller is made of welded steel plates of high quality. After static and dynamic balance correction, the operation is stable and reliable.
(2) The housing is made of a whole spiral shell welded with ordinary steel plates.
(3) The air inlet adopts the collecting collecting streamline structure and is connected with the front cover plate with bolts.
The fan has the advantages of matching the pressure and flow rate with the performance of cupola, high efficiency and low noise. In the structure than the centrifugal blower simple, low speed, easy to use and maintenance, low price advantages.
Performance and selection
Performance table of H10-13-11 high pressure centrifugal fan
简体中文
